Spare Parts & Consumables • Since 2006

Aesthetic Laser Machine Spare Parts in Pakistan

Handpieces, flashlamps, power boards, cooling parts, optics and consumables for laser, IPL, HIFU and Hydrafacial machines — identified, supplied, fitted and tested by our own engineers. Keep your clinic running without waiting months for parts from abroad.

Since 2006

Supporting aesthetic clinics

350+

Machine installations

In-house

Engineers fit & test parts

Nationwide

Supply & fitting across Pakistan

Why the right part matters

A wrong or low-grade part can cost more than the repair

Aesthetic lasers run at high voltage, high energy and tight temperatures. A flashlamp with the wrong spec, a weak pump or an incompatible board can lower treatment results, trigger repeated errors or damage other components. That is why at Dermionic Technologies every part is matched to your exact model by an engineer before it is supplied, and — when we fit it — tested and calibrated before your machine goes back into use.

Because we also service and repair machines, we know which parts actually fail in Pakistani clinic conditions: heat, dust, voltage fluctuation and hard water. That experience helps you buy the right part the first time.

What we supply

Spare Parts We Supply for Aesthetic Machines

Parts are matched to your machine model and serial number. Availability depends on the model — send us the details and we will confirm what is available and the lead time.

Laser Handpieces & Diode Stacks

The part that does the work — and wears the most.

Flashlamps & Laser Rods

Lamps lose energy over time and must match your exact cavity.

Power Supplies & HV Boards

The most common cause of “no power” and charging errors.

Control Boards & Displays

Electronics that run the software, sensors and screen.

Cooling System Parts

Cooling faults stop more lasers than anything else.

Optics & Beam Delivery

Clean, aligned optics keep energy where it should be.

Skin Cooling Parts

Comfort and safety systems for high-energy treatments.

Hydrafacial Parts & Consumables

Keep suction strong and treatments hygienic.

HIFU, RF & Microneedling

Cartridges and transducers for energy-based devices.

Footswitches, Cables & Accessories

Small parts that stop a whole treatment when they fail.

Parts by machine

Spare Parts by Brand & Machine Type

We support international brands as well as every machine we supply. Choose your machine to learn more, or send us its model and serial number.

Diagnose before you buy

Common Machine Problems & the Parts Behind Them

Not every fault needs a new part. Our engineers check the symptom first, so you only pay for what actually needs replacing.

Low energy or weak results

Ageing flashlamp, worn handpiece or dirty optics. Often fixed by lamp/handpiece service rather than a new machine.

Flow, water or temperature error

Water pump, flow sensor, clogged DI filter or old cooling water. One of the most common laser faults.

No power or “charging” error

High-voltage board, capacitors or power supply. Usually repairable at component level.

Handpiece not cooling

TEC chiller, cooling plate, fan or cryogen (DCD) valve, depending on the machine.

Screen frozen or not responding

Touch screen, display cable or control board — sometimes only a software or connector issue.

Weak Hydrafacial suction

Vacuum pump, solenoid valve, blocked hoses or worn tips.

Save money

Repair First, Replace When Needed

Many suppliers only sell new parts. As an engineering company, we can often repair the original part — boards, power supplies and some handpieces — at a fraction of the replacement cost.

We repair when possible

We replace when it’s safer

How you can buy

Supply Options

Supply Only

For clinics with their own technician. We confirm compatibility and supply the correct part.

Supply & Fit

Our engineer fits the part at your clinic or in our Islamabad workshop, then tests and calibrates the machine.

Repair & Return

Send us the faulty board or handpiece — we repair, test and return it, often saving the cost of a new part.

How to order

How to Order Spare Parts

1. Send machine details

Model, serial number and a photo of the part or label — on WhatsApp or email.

2. Engineer confirms the part

We check compatibility and whether a repair is possible instead of replacement.

3. Quote & lead time

You get the price, availability and delivery or fitting time before ordering.

4. Supply or fitting

We dispatch the part or our engineer fits it at your clinic or our workshop.

5. Testing & calibration

When we fit a part, the machine is tested and calibrated before treatment use.

6. After-sales support

Advice on maintenance so the same part does not fail again early.

Make parts last longer

Maintenance Tips from Our Engineers

Why Dermionic

Why Clinics Buy Spare Parts from Dermionic

Engineer-verified compatibility

Every part is checked against your model and serial number before it is supplied.

Tested before handover

Parts we fit are tested and the machine calibrated before it goes back to treatments.

Our own service team

Fitted by our in-house electrical, electronics and biomedical engineers.

Experience since 2006

Two decades supporting aesthetic and medical equipment in Pakistan.

Honest advice

If a repair is cheaper and safe, we tell you — even if it means selling fewer parts.

Across Pakistan

Based in Islamabad, supplying and fitting parts in Rawalpindi, Lahore, Karachi and beyond.

FAQ

Spare Parts – Frequently Asked Questions

Send us the machine brand, model and serial number, plus a photo of the faulty part or its label, on WhatsApp at +92 321 5544 674. Our engineers will identify the correct part and confirm compatibility before you order.

Both. You can buy the part only, or our engineers can fit it at your clinic or in our Islamabad workshop and then test and calibrate the machine.

Often, yes. Power supplies, control boards and some handpieces can be repaired at component level, which usually costs much less than a new part. We will tell you which option makes sense.

It depends on the part and model. Parts available locally can be supplied quickly; others need to be imported. We confirm the lead time in your quote before you order.

We support Candela, Cutera, Lumenis, DEKA and Lutronic systems as well as diode, Pico, Q-switched Nd:YAG, CO2, IPL, HIFU and Hydrafacial machines, including all machines we supply.

Yes. We supply parts and provide onsite fitting for clinics in Rawalpindi, Lahore, Karachi and other cities across Pakistan.

Need a part for your machine?

Send the model, serial number and a photo of the part — our engineers will confirm the right part, price and lead time.