Aesthetic Laser Machine Spare Parts in Pakistan
Handpieces, flashlamps, power boards, cooling parts, optics and consumables for laser, IPL, HIFU and Hydrafacial machines — identified, supplied, fitted and tested by our own engineers. Keep your clinic running without waiting months for parts from abroad.
Supporting aesthetic clinics
Machine installations
Engineers fit & test parts
Supply & fitting across Pakistan
A wrong or low-grade part can cost more than the repair
Aesthetic lasers run at high voltage, high energy and tight temperatures. A flashlamp with the wrong spec, a weak pump or an incompatible board can lower treatment results, trigger repeated errors or damage other components. That is why at Dermionic Technologies every part is matched to your exact model by an engineer before it is supplied, and — when we fit it — tested and calibrated before your machine goes back into use.
Because we also service and repair machines, we know which parts actually fail in Pakistani clinic conditions: heat, dust, voltage fluctuation and hard water. That experience helps you buy the right part the first time.
Spare Parts We Supply for Aesthetic Machines
Parts are matched to your machine model and serial number. Availability depends on the model — send us the details and we will confirm what is available and the lead time.
Laser Handpieces & Diode Stacks
The part that does the work — and wears the most.
- Diode laser handpieces & bars
- Nd:YAG / Pico handpieces & tips
- Sapphire windows & cooling plates
- Handpiece repair & re-gassing support
Flashlamps & Laser Rods
Lamps lose energy over time and must match your exact cavity.
- Flashlamps for Nd:YAG, Alexandrite & IPL
- IPL filters & crystals
- Laser rods & cavity parts
- Energy re-calibration after replacement
Power Supplies & HV Boards
The most common cause of “no power” and charging errors.
- High-voltage charging boards
- Capacitors & capacitor banks
- IGBT / driver boards & SMPS units
- Component-level board repair
Control Boards & Displays
Electronics that run the software, sensors and screen.
- Main control & interface boards
- Touch screens & LCD displays
- Sensors, relays & interlock boards
- Keys, emergency stops & switches
Cooling System Parts
Cooling faults stop more lasers than anything else.
- Water pumps & flow sensors
- DI / water filters & resin
- Radiators, fans & TEC chillers
- Tanks, hoses & water fittings
Optics & Beam Delivery
Clean, aligned optics keep energy where it should be.
- Optical fibres & connectors
- Lenses, mirrors & protective windows
- Articulated-arm parts (CO2)
- Spot-size guides & spacers
Skin Cooling Parts
Comfort and safety systems for high-energy treatments.
- Cryogen (DCD) valves & lines
- Cryogen canister fittings
- Cold-air & contact cooling parts
- Temperature sensors
Hydrafacial Parts & Consumables
Keep suction strong and treatments hygienic.
- Hydra tips & handpieces
- Vacuum pumps & solenoid valves
- Hoses, jars & bottle connectors
- Treatment solutions & serums
HIFU, RF & Microneedling
Cartridges and transducers for energy-based devices.
- HIFU cartridges & transducers
- RF microneedling tips
- Dr Pen cartridges & needles
- Gel, cables & applicators
Footswitches, Cables & Accessories
Small parts that stop a whole treatment when they fail.
- Footswitches & pedals
- Power & handpiece cables
- Interlock & door switches
- Safety goggles & accessories
Spare Parts by Brand & Machine Type
We support international brands as well as every machine we supply. Choose your machine to learn more, or send us its model and serial number.
Common Machine Problems & the Parts Behind Them
Not every fault needs a new part. Our engineers check the symptom first, so you only pay for what actually needs replacing.
Low energy or weak results
Ageing flashlamp, worn handpiece or dirty optics. Often fixed by lamp/handpiece service rather than a new machine.
Flow, water or temperature error
Water pump, flow sensor, clogged DI filter or old cooling water. One of the most common laser faults.
No power or “charging” error
High-voltage board, capacitors or power supply. Usually repairable at component level.
Handpiece not cooling
TEC chiller, cooling plate, fan or cryogen (DCD) valve, depending on the machine.
Screen frozen or not responding
Touch screen, display cable or control board — sometimes only a software or connector issue.
Weak Hydrafacial suction
Vacuum pump, solenoid valve, blocked hoses or worn tips.
Repair First, Replace When Needed
Many suppliers only sell new parts. As an engineering company, we can often repair the original part — boards, power supplies and some handpieces — at a fraction of the replacement cost.
We repair when possible
- Power supplies & HV charging boards
- Control & driver boards (component level)
- Selected handpieces & cooling units
- Cables, connectors & footswitches
We replace when it’s safer
- Flashlamps past their working life
- Cracked optics, windows & fibres
- Consumable tips, filters & cartridges
- Parts where repair would risk patient safety
Supply Options
Supply Only
For clinics with their own technician. We confirm compatibility and supply the correct part.
Supply & Fit
Our engineer fits the part at your clinic or in our Islamabad workshop, then tests and calibrates the machine.
Repair & Return
Send us the faulty board or handpiece — we repair, test and return it, often saving the cost of a new part.
How to Order Spare Parts
1. Send machine details
Model, serial number and a photo of the part or label — on WhatsApp or email.
2. Engineer confirms the part
We check compatibility and whether a repair is possible instead of replacement.
3. Quote & lead time
You get the price, availability and delivery or fitting time before ordering.
4. Supply or fitting
We dispatch the part or our engineer fits it at your clinic or our workshop.
5. Testing & calibration
When we fit a part, the machine is tested and calibrated before treatment use.
6. After-sales support
Advice on maintenance so the same part does not fail again early.
Maintenance Tips from Our Engineers
- Change cooling water and filters on the manufacturer’s schedule — use distilled or deionised water only
- Keep the machine in an air-conditioned, dust-free room with space around the vents
- Use a voltage stabiliser or UPS rated for your machine
- Clean handpiece windows and tips after every session as the manual describes
- Never ignore a recurring error code — early service prevents board and lamp damage
- Book a preventive maintenance visit at least once or twice a year
Why Clinics Buy Spare Parts from Dermionic
Engineer-verified compatibility
Every part is checked against your model and serial number before it is supplied.
Tested before handover
Parts we fit are tested and the machine calibrated before it goes back to treatments.
Our own service team
Fitted by our in-house electrical, electronics and biomedical engineers.
Experience since 2006
Two decades supporting aesthetic and medical equipment in Pakistan.
Honest advice
If a repair is cheaper and safe, we tell you — even if it means selling fewer parts.
Across Pakistan
Based in Islamabad, supplying and fitting parts in Rawalpindi, Lahore, Karachi and beyond.
Spare Parts – Frequently Asked Questions
Send us the machine brand, model and serial number, plus a photo of the faulty part or its label, on WhatsApp at +92 321 5544 674. Our engineers will identify the correct part and confirm compatibility before you order.
Both. You can buy the part only, or our engineers can fit it at your clinic or in our Islamabad workshop and then test and calibrate the machine.
Often, yes. Power supplies, control boards and some handpieces can be repaired at component level, which usually costs much less than a new part. We will tell you which option makes sense.
It depends on the part and model. Parts available locally can be supplied quickly; others need to be imported. We confirm the lead time in your quote before you order.
We support Candela, Cutera, Lumenis, DEKA and Lutronic systems as well as diode, Pico, Q-switched Nd:YAG, CO2, IPL, HIFU and Hydrafacial machines, including all machines we supply.
Yes. We supply parts and provide onsite fitting for clinics in Rawalpindi, Lahore, Karachi and other cities across Pakistan.
Need a part for your machine?
Send the model, serial number and a photo of the part — our engineers will confirm the right part, price and lead time.