Meet Our Service Team
The engineers behind every Dermionic installation, repair and maintenance visit. Our in-house team of electrical, electronics and biomedical engineers keeps aesthetic laser and Hydrafacial machines running in clinics across Pakistan.
Serving clinics since
Lead engineer experience
Machine installations
Onsite service coverage
An aesthetic laser is only as reliable as the people who service it
Buying a laser machine is a big investment, and the first question most doctors ask is: who will fix it when something goes wrong? At Dermionic Technologies the answer is our own engineers — not an outsourced technician and not a phone line abroad. The same team that installs your machine diagnoses faults, replaces parts, calibrates output and trains your staff, so your clinic deals with people who already know your machine.
Our Engineers & Technicians
A multi-disciplinary team covering high-voltage electronics, laser optics, cooling, calibration, R&D, biomedical safety and clinical training — part of the 50-member Dermionic Technologies team.
Leadership & Service Engineering
Leading the technical team and handling complex diagnosis and repairs.

Engr.Sohail Sarwar
Electrical Engineer • Electronics • 20 Years Experience
Sohail founded Dermionic Technologies in 2006 and leads the company’s technical work. An Electrical Engineer specialising in electronics (BSc Electrical Engineering, University of Azad Kashmir), he brings two decades of hands-on experience with aesthetic and medical equipment.
- Leads diagnosis of complex, board-level faults
- Power supplies, laser drivers & control electronics
- Sets service standards and technical training for the team
- Author of Dermionic’s technical buying & maintenance guides

Engr.Sardar Adeel
Electronics Engineer • 16 Years Experience
Adeel is our senior service engineer, with 16 years of experience in electronics troubleshooting and repair. He handles fault-finding and repair on laser and energy-based systems, from error codes to component-level electronics.
- Fault diagnosis & error-code troubleshooting
- Electronic board and power-section repair
- Laser output testing & calibration
- Installation & commissioning of new and refurbished machines
Technical Specialists
Hands-on specialists for field service, laser optics and handpieces.

Mudasir Altaaf
Electronics Technician • Onsite Service
Mudasir supports our field service work at clinics — installations, preventive maintenance visits and on-site repairs — making sure machines are set up correctly and kept in safe working condition.
- Machine installation & site setup
- Preventive maintenance visits
- Cooling system service (pumps, filters, water circuits)
- Handpiece inspection & parts replacement

Mansoor Hussain
Laser Systems • Optics & Handpieces
Mansoor specialises in the optical side of laser machines — handpieces, fibres, beam alignment and flashlamps — where precise work makes the biggest difference to treatment results.
- Handpiece inspection, cleaning & repair
- Flashlamp & laser rod replacement
- Fibre, lens & beam-path alignment
- Energy output checks after optical work
R&D, Biomedical & Clinical Training
Testing, safety and training that keep machines and treatments reliable.

Nabeel Gohar
R&D • Testing & Evaluation
Nabeel works in our R&D department, testing and evaluating machines and technologies before they reach clinics, and helping develop better repair and upgrade solutions.
- Testing new & refurbished machines before delivery
- Evaluating new aesthetic technologies
- Developing repair & upgrade solutions
- Technical documentation & test records

Hamza Ali
Biomedical Engineer • Safety & Calibration
Hamza brings a biomedical engineering background to our team, focusing on the safe, correct operation of medical aesthetic equipment and on helping clinic staff use their machines properly.
- Electrical safety & performance checks
- Calibration verification after repair
- Operator training for doctors & technicians
- Service documentation & maintenance records

Mustafa Ahmed
Clinical Training • Treatment Protocols
Mustafa trains doctors and clinic staff to use their machines safely and effectively, so every clinic gets consistent, predictable results from day one.
- Hands-on operator training at installation
- Treatment settings & protocol guidance
- Laser safety training for clinic staff
- Refresher training for existing clients
Aesthetic Laser Machine Repair & Maintenance Services
Installation & Commissioning
Site check, power and water requirements, setup, test treatments and handover to your staff.
Diagnostics & Error Codes
Send us the model and error message or photo — our engineers diagnose remotely first to save time and cost.
Electronics Repair
Power supplies, control boards, laser drivers and high-voltage sections repaired at component level where possible.
Cooling System Service
Water pumps, filters, flow and temperature faults, leaks — the most common cause of laser downtime.
Handpieces & Optics
Inspection, cleaning and replacement of handpieces, windows, fibres and treatment tips.
Calibration & Testing
Energy output and performance checks after every repair so treatments stay safe and effective.
Preventive Maintenance
Scheduled check-ups that catch problems early and extend the working life of your machine.
Spare Parts Supply
Sourcing and fitting of replacement parts and consumables for the machines we service.
Training for Clinics
Hands-on operator training and daily-care guidance for doctors and clinic technicians.
Brands & Technologies We Service
Our engineers work on international brands as well as the full range of machines we supply:
Candela GentleLase / GentleMax Pro / GentleYAG • Cutera • Lumenis • DEKA • Lutronic • Diode Laser (Soprano Titanium) • Pico & Q-Switched Nd:YAG • CO2 Fractional • Erbium Glass & Erbium YAG • IPL • HIFU • Hydrafacial
Detailed repair guides:
Our Service Process
1. Send the details
WhatsApp us the machine model, the error message or a photo/video of the problem.
2. Remote diagnosis
An engineer reviews it and tells you the likely cause — many issues are solved at this stage.
3. Clear quotation
You receive the repair plan, parts needed and cost before any work begins.
4. Onsite or workshop repair
We repair at your clinic or in our Islamabad workshop, depending on the fault.
5. Testing & calibration
Output and safety are checked before the machine goes back into treatment use.
6. Follow-up support
We stay in touch after the repair and advise on maintenance to prevent repeat faults.
Why Clinics Choose Dermionic for After-Sales Service
In-house engineers
Our own qualified team — not outsourced freelancers — with engineering degrees in electrical, electronics and biomedical fields.
Experience since 2006
Two decades working with aesthetic and medical equipment, and 350+ installations across Pakistan.
One team, start to finish
The engineers who install your machine are the ones who maintain it — no handover gaps.
Component-level skills
We find and fix the actual faulty part instead of replacing whole assemblies, saving you money.
Spare parts support
Parts and consumables sourced for the machines we sell and service.
Nationwide coverage
Based in Islamabad, serving clinics in Rawalpindi, Lahore, Karachi and cities across Pakistan.
Service Team – Frequently Asked Questions
Our engineers service aesthetic lasers and energy-based devices including Candela, Cutera, Lumenis, DEKA and Lutronic systems, diode, Nd:YAG, Pico, CO2, Erbium and IPL machines, HIFU units and Hydrafacial machines.
Send your machine model and the exact error message, or a photo or short video of the problem, on WhatsApp at +92 321 5544 674. An engineer will review it and advise on the next step.
Yes. Our team is based in Islamabad and provides onsite service to clinics in Rawalpindi, Lahore, Karachi and other cities across Pakistan.
Yes. We source and fit replacement parts and consumables for the machines we sell and service. Availability depends on the model and fault, so share your machine details for a quick answer.
Yes. We provide hands-on operator training and daily-care guidance for doctors and technicians, both at installation and later on request.
Machine down or showing an error?
Talk directly to our service engineers. Send the model and error message — we’ll tell you what’s wrong and how to fix it.